Settings

The following describes the settings for Configuration > Network > SNMP Configuration in detail.

Setting	Description
Trap Agent Port	TCP Port to listen for traps
Trap Agent Debug Level	Level of debug detail starting from nothing (OFF) up to heavy debug (TRACE) . The log can be found in Administration Web Interface > Logs > SNMP Processor
Trap OID Output Format	Format of the corresponding trap OID, can be fully numeric up to symbolic. The Trap Filters are fully dependent on this setting, e.g. if you configured trap filters to match on numeric OIDs, you must set numeric OIDs as format here too. Otherwise the trap filters won't apply anymore.
Max number of trap history entries	Number of last traps that should be saved in the trap history database, see Administration Web Interface > Trap Filters
Trap community authorization string	Community string for authentication of incoming SNMP traps
Agent community string	Community for SNMP Agent (SNMP GET)
Agent sysName Value	System name, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysName.0
Agent syslocation Value	System location, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysLocation.0
Agent syscontact Value	System contact, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysContact.0

On this page: