...

...

Technical prerequisites for customer

For running the DockerDemo the host needs to have the following pre-requisites:

• recent installation of Vagrant (1.7+) (it is freely available from https://www.vagrantup.com)
• Windows 7+, OS X 10.10+
• administrative privileges are required for installing Vagrant and running it
• Vagrant runs on a separate network interface, one has to make sure, that this special interface (usually having IP: 192.168.33.10) is not firewalled; furthermore without further configuration it cannot be reached from the local network
• for Linux/Ubuntu the DockerDemo can be run directly, but you need to have a very recent version of the DockerEngine (1.11+) and DockerCompose (1.7+) and you have to make sure, that there are no conflicting applications running, because usually they get bridged to localhost.

Administrative prerequisites for customer

The customer needs to have a DockerHub (https://hub.docker.com) account, and this account has to be a member of the Azeti organization (https://hub.docker.com/u/azeti/) to access the private DockerImages from Azeti. 

Administrative prerequisites for consultant

Basically you need to get hold of the latest demoBundle; it is automatically built and tagged with the corresponding version numbers of the whole stack. The demo bundle can be downloaded from the in-house private Nexus at: http://10.0.0.70:8081/nexus/content/repositories/demos/net/azeti/ssc/demo/demoStack/ This site is only available from inside the Azeti network (or via VPN) and you need Nexus credentials.

Installation the Vagrant-Way

•  make sure all pre-requisites are met
•  extract demoStack-Version.zip (e.g. demoStack-0.3.6.zip), it will expand into a demo folder
•  

  change to this folder, open a command prompt / terminal there and run 

  Code Block
  vagrant up

•  

  it might take some time and will prompt for your DockerHub credentials (username, passwort) and hit Enter

  Code Block
  Username for DockerHub: customerusername Password for DockerHub: allyoursecretsarebelongtous

•  

  for the first time a lot of files need to be downloaded (2.5 GB) so be patient

•  

  after a while you should see something like 

  Code Block
  Demo has been successfully deployed!

•  

  then you can open your browser at http://192.168.33.10:8080/SSCAdminApp

Vagrant Usage

Starting and Stopping

Simply stop the Vargrant VM, either via VirtualBox or (being in the demo folder) for stopping:

vagrant halt

For starting: 

vagrant up

Updating

The demo stack can be easily updated without losing data, because it just depends on the private azeti/tomcat-data image, that has the latest releases. For updating you need to login in to the Vagrant VM (password + username are both vagrant) and call the update script 

vagrant ssh
sudo -s
cd /bootstrapping
./update_stack.sh

Uninstalling

The whole stack can seamlessly uninstalled by either removing the Vagrant VM from VirtualBux or (being in the demo folder): 

vagrant destroy

Installation

1. Ensure that you got docker-compose installed.

...

1. Code Block
   root@ubuntu:~# which docker-compose /usr/local/bin/docker-compose root@ubuntu:~# docker-compose -v docker-compose version 1.7.1, build 0a9ab35 root@ubuntu:~#

Installation on Docker-enabled environments is the fastest way; just open a Bash shell in the demo folder and run.

...

1. Extract the installation files

   Code Block
   ~/Downloads ❯❯❯ unzip demoStack-1.0.6.zip ... inflating: demo/init_stack.sh

Post-installation steps

Configure ActiveMQ broker access from the browser

Your browser connects to the ActiveMQ broker to retrieve values. In order to be able of connecting, you need to enter as superadmin and change the parameter net.azeti.cloud.mqtt.url in the cloud configuration. Set it to the URL of your machine. Remember to open the corresponding port in your server.

Image Removed

Upload Site Controller software.

In order to work with templates, you will need to upload a current version of Site Controller to the cloud.

Demo Stack Usage

...

1. Execute init_stack.sh and follow the instructions. It will automatically pull the required images and files from the azeti repository and set up the basic system.

   Code Block
   ~/Downloads/demo ❯❯❯ ./init_stack.sh For this script to work, you need credentials for the DockerHub and you must have read access to the Azeti Organization! Enter DockerHub username and press [ENTER]:

Docker Stack Administration

The azeti Engine stack comes with a collection of admin administrative scripts which basically wrap around docker-compose. Change into the demo directory to access the scripts.

azeti@ubuntu:~/demo$ ll
total 48
...
-rwxr-xr-x 1 azeti azeti  101 May 31 17:40 start_stack.sh*
-rwxr-xr-x 1 azeti azeti   99 May 31 17:40 stop_stack.sh*
-rwxr-xr-x 1 azeti azeti  915 May 31 17:40 update_stack.sh*

Starting and Stopping

Use the start and stop script.

...

azeti@ubuntu:~/demo$ sudo ./start_stack.sh
Starting the full stack...
Starting influxdb_data ... done
Starting db_data ... done
Starting db ... done
Starting influxdb ... done
...

Update

You can eaisly easily update the full stack with the script, it does a docker-compose pull ... and fetches the latest application builds. Make sure to create backups before hand.

azeti@ubuntu:~/demo$ sudo ./update_stack.sh
Enter DockerHub username and press [ENTER]: 
Enter DockerHub password and press [ENTER]: 
Login Succeeded
Stopping the full stack...
Stopping sscdemo_tomcat_1 ... done
Stopping sscdemo_activemq_1 ... done
Stopping sscdemo_influxdb_1 ... done
Stopping sscdemo_db_1 ... done
Pulling tomcat (azeti/tomcat-data:latest)...
latest: Pulling from azeti/tomcat-data
8b87079b7a06: Already exists
..
Starting sscdemo_db_data_1
...Starting activemq ... done
Starting tomcat ... done

Log Rotation

Docker will not rotate container logfiles automatically. This can cause high disk usages and large amount of log file data. Check with your Docker Administrator if any log rotation is already configured. Below is an easy approach (based upon this article) for regular rotation using logrotate.


1. Create a new Logrotate config file in /etc/logrotate.d/docker-container

2. Enter the below configuration

   Code Block
   var/lib/docker/containers/*/*.log { rotate 7 daily compress size=1M missingok delaycompress copytruncate }

3. Start logrotate with the new configuration

   Code Block
   logrotate -fv /etc/logrotate.d/docker-container

Next Steps