...

The filters that can be used are:

• Type: Defines the type of system event that is logged. The dropdown only shows the types that are displayed at that moment, The possible types are, amongst others:
  • action: An action executed by the local sitecontroller. Can be either remote or triggered by a rule
  • active Monitoring_monitoring: When a user has activated the active monitoring (live monitoring) of the site
  • Config UpdateConfigUpdate: When the system has received a new sensor configuration template.
  • job_status: When the system is performing a job, like an update.
  • module_state_transition: When a module of the SiteController is starting or stopping.
  • rev_info_report: When they local SiteController boots up, it send the rev_info_report, which shows the software version that is running
  • time-sync: When the time difference between the gateway and the server is too big. a message like this is shown.
• Severities: The predefined severity of each system event.
• Time Range: Used to select the time range for which the system message will be shown.
• Limit: The maximum number of messages shown in the page. Press the button Load to reload the messages if this parameter is changed.

Event Log

Shows all the historic list of sensor events (or alarms) for a specific site. In the top right corner to total number of events can be seen.

The event list can be filtered by:

• Time Range: To select the time period for which the events will be shown
• Filter: This is a free text filter that is applied to all the fields. Can be the sensor name, the sensor state, the sensor output. Case sensitive.
• Cameras only: Shows only the sensor that have an image associtated. Hovering over the camera icon (Image Added) shows the picture.

Audit Log

Shows all the actions that the system users haver performed, suchs as logins, changing configurations, deploying them, triggering remote actions, etc.

The audit log can be filtered by:

• Time Range: To select the time period for which the events will be shown
• Context:

  • ORG: Changes done to the organization settings

  • CU: Actions over the sensor data, such as deleting the historical data

  • LOCATION: Changes the location information, suchs as name, coordinates, etc.

  • USER: A user access to the system

  • ACTION: A remote action triggered by a user

  • ACCESS_CONTROL: Acces codes deployed to the sites

  • DEPLOYMENTS: Config changes sent to the locations

• Users: Filter by the user that performed the action.

Sensors

Last Status

Error state

...