Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

SettingDescription
Name

Name of the host

Notice: The name shall not contain special characters or spaces. The name must be unambiguous and shall not be assigned twice.
Alias

Alias name of the host. The alias name is used in the web interface of the SONARPLEX appliance.

Notice: The alias name must be unambiguous and shall not be assigned twice. If possible, use the same designation as in the "Name" input box.
Address/HostnameIP address or name of the host.

Check host status via


check-fasthost


check-firebox




check_host


 


check-host-ok


check_slowhost




check-slowswitch




check_switch



 

Choose between the 7 predefined options. To add another plugins see ….


 


Check for devices that do not react to a ping (e.g. firewalls). "OK" is always simulated as the result of the check.

Notice: This option only works for WatchGuard firewalls!


A standard check for hosts with short response times

response time > 3 s => WARNING

response time > 5 s => CRITICAL


Check for devices that do not react to a ping (e.g. firewalls). "OK" is always simulated as the result of the check.


Option for hosts with slow VPN or ISDN connections with longer response times:

response time > 5 s => WARNING

response time > 8 s => CRITICAL


Option for switches with slow VPN or ISDN connections with longer response times:

response time > 5 s => WARNING

response time > 8 s => CRITICAL


Option for quickly accessible switches with short response times:

response time > 3 s => WARNING

response time > 5 s => CRITICAL

Contactgroup receiving notificationsContact group which shall receive a notification in the event of fault message of this host
Normal check frequency (minutes) 
Maximum check attemptsDefine how many times the SONARPLEX appliance shall check the host status. Enter a numerical value in the input box.
Retry check frequency (minutes) 
Notification frequency (minutes)

Time interval for notifications in minutes.

If a pending problem is not acknowledged or remedied, after the period entered here has elapsed, another notification is sent to the responsible contact group.
Notification timeperiodValid time period to send notifications
Send notifications when host is in stateDefine what status change triggers a notification
Performs checks

Define if the Host check is enabled or not.

Send notificationDefine if the notifications for this host are enabled or not
Enable flap-detection 
Lower flapping-threshold 
Upper flapping-threshold 
Additional information 
Notes (optional) 
My properties (optional)