Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: added some text

...

With Azeti SONARMANAGER you have an overview of all the SONARPLEX installed in your system in a tree-branch interface at the left of the screen. Typically, in your organization you will have several locations  (i.e. Berlin, Viena, Turin), and some sub-locations for the different facilities. In each from this sub-locations, you will have one or more SONARPLEX appliances configured, that are the physical monitoring devices. For every SONARPLEX, you will see a list of hosts, that normally represent devices or computers, and for every host a list of services, that normally will be connected with a sensing interface (i.e. keypad, dry-contact, alarm, UPS, etc).

Image Removed

 

 

 

...

 

Image AddedIn this image, you can see a list of locations (Berlin, France, Siria), and one of them has two sub-locations (Siria: North Facility and South Facility). In this sub-location, you find one appliance (NG_Bank), with some hosts.
Image AddedIn this image, you can see that a host can have one of multiple services, that will be checked by the SONARPLEX appliance. Some examples could be the Cabin.2.Temperature service, that is connected to a temperature sensor, or the Cabin.2-Door-contact-security, that is connected to a door contact.

Reading host/services status

Host and services have always a round circle with a color next to them that indicates the status of this host/service. The following 4 status are possible:

Image AddedThe host/service is in status OK, meaning there is not a problem with the host or service.
Image AddedThe host/service is in status WARNING, for signaling status that are not the standard situation, and depending on the service some action need to be taken.
Image AddedThe host/service is in status CRITICAL, for signaling that something went wrong and probably an action need to be taken.
Image AddedThe host/service is in status UNKNOWN, meaning that the information could not be retrieved.

Services can also have the following statuses:

Image Added(no special indication apart from the color) The service is an active check
 The service is a passive check
 The notifications for the service have been disabled

 

 

Problems and problems history

...