Introduction

The SiteController is actually intended to send acquired sensor data and other information to cloud as fast as possible. But if an upload of the data is not possible or not intended, for instance by the configuration of the SiteController, the collected sensor data are stored locally until a connection to the cloud is established. The USB data export procedure is supported by the visualization using one LED at the azeti-machina NEXCOM NIFE103.

Neither a keypad nor a monitor are required.

This document describes how to configure the SiteController to force the local storage of data and how to retrieve the collected data offline to a prepared USB flash drive. Furthermore is added, how these data on the USB flash drive could be used.