A raw_result is a type of MQTT message published by almost every data acquisition module of the SiteController to the MQTT topic raw_result/<gateway_id>, it contains the values read by the module, normally (but not restricted to) as numbers or strings, without any processing applied. A raw_result message can contain the value read from 1 or more sensors, the used format is always JSON. This type of messages are not retained in internal storage nor sent to the cloud.
A raw_result should comply with the following structure:
| Code Block |
|---|
| language | js |
|---|
| title | raw_result message structure |
|---|
|
{
"error_code": <int>,
"result_dict": {
"sensor_1": {
"changed": <true | false>,
"value": <value read from sensor/datapoint>data point>,
"err_code": <int>,
"err_desc": "<description<textual description of anthe error>"
},
"sensor_2": {
......
},
"sensor_3": {
......
}
},
"partial": <true means this raw_result can contain just some sensors associated to the sensor_gateway, false or absent means all sensor are present in every raw_result message>,
"sensor_gateway_id": "<identification of the gateway associated to this sensor group>",
"timestamp": "<message timestamp in ISO8601 format>"
} |
...
| Name | Purpose | Optional | Default value |
|---|
| error_code | Error code classifying the whole raw_result | No |
|
| result_dict | dictionary with every sensor read, see the next table for more information | No |
|
| partial | true means this raw_result can contain just some sensors associated to the sensor_gateway, false or absent means all sensor are present in every raw_result messageNote: Parameter added in | Jira Legacy |
|---|
|
| server | System JIRA |
|---|
| columns | key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution |
|---|
| serverId | 44da6023-248d-3348-aa75-5314a89d8310 |
|---|
key | SC-1088Yes | False | | sensor_gateway_id | Identification of the gateway associated to this sensor group | NovalueType |
|
| This could be set to one of a list of specific data types to indicate the data values in result_dict have a special relationship (e.g. GPS coordinates, high frequency data samples, WiFi or Bluetooth scan data, ...) | Yes | timestamp | Message timestamp in ISO8601 format | Yes | current timestamp |
Field result_dict
| Name | Purpose | Optional | Default value |
|---|
| changed | Mark the specific sensor as been changed in comparison with the last reading | No |
|
| value | Value readed read from the sensor, this can be a number, string or (in case of a set valueType in the raw_result object) any other valid JSON structure accoding to that valueType, boolean, string. | No |
|
| err_code | Integer value representing a error about this specific sensor, 0 means no error, any other value means a error specific for the device, this value have higher relevance than error_code from raw_result | Yes | 0 |
| err_desc | Textual representation of the error | Yes | "" |
Available valueTypes
valueType| description | Futher reading (e.g. Jira Ticket/Wiki page) | | graphBlob | high frequency sensor data sample | FAG smart check |
| wifiAccessPoints | a list of WiFi Access points in range | AP (wifi) scanner |
beaconRaw | ble scanner | ble_estimote | ble scanner | ble_scanner | ble scanner | Example
| Code Block |
|---|
{
"error_code": 0,
"result_dict": {
"accuracy": {
"changed": true,
"value": 1.1061637275660097
},
"mac": {
"changed": false,
"value": "d9:cc:ba:9a:88:db"
},
"major": {
"changed": false,
"value": 4463
},
"minor": {
"changed": false,
"value": 12099
},
"proximity": {
"changed": false,
"value": 1.0,
"err_code": 1,
"err_desc": "too close"
},
"rssi": {
"changed": true,
"value": -77
},
"tx_power": {
"changed": false,
"value": -76
},
"type": {
"changed": false,
"value": "IBeaconAdvertisement"
},
"uuid": {
"changed": false,
"value": "b9407f30-f5f8-466e-aff9-25556b57fe6d"
}
},
"sensor_gateway_id": "ble_ibeacon",
"timestamp": "2018-05-18T15:04:35.097Z",
"valueType": "beaconRaw",
"partial": false
} |
