Versions Compared

Old Version 3

changes.mady.by.user Laurette Tamdjokwen (Deactivated)

Saved on

compared with

New Version 4

changes.mady.by.user Laurette Tamdjokwen (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Open the 
    Insert excerpt
    _AdminWeb
    _AdminWeb
    nopaneltrue
     > Configuration > Host Checks and select a command name for host checks (see picture below).

  2. Enter your settings or change itchanges, as described in the table below.

    Parameter

    Description

    Filter name

    Filter name to be used as filter ID - must be unique. Allowed characters are a-z, A-Z, 0-9 and underscore (_).

    Source address

    Address of host sending the trap (empty address means that any source address is allowed to pass appropriate trap).

    OID

    OID of the trap. If specified OID matches OID of appropriate trap or any of its bound data OIDs, the trap will be passed to the monitoring process.

     

    Resulting service state

    Service state created by determining passive check result for service matching trap parameters.

    Following values are allowed: “OK”, “WARNING”, “CRITICAL”, “UNKOWN”

    Notice: There are two different options to determine service state: The filter option above and service definition. By default the filter option is used. This which may be changed by service definition afterwards during trap processing.

...