...
The satellite device should send its status every 30 minutes and only HARD events should be sent.
The general procedure is as follows
- Configure the Agent on the Central SONARPLEX
- Set the location identifier on the satellite
- Enable status and event delivery on the satellite
Step-by-step guide
Follow these steps for the Central SONARPLEX. First set the azeti Agent credentials.
- Open the in the administrative Web Interface (http://172.16.0.254:81) and choose Network
- Choose Agent Configuration
- Set Port to use: 4192
- Set Agent Password: How-ToDM
- Click
to save the configuration
Set the location identifier.
- Choose
- Choose My Properties and scroll down to the bottom
- Open the ressource LOCATION
- Set Ressource Value: Cologne
- Click
to save the configuration
Now enable the status and event delivery on the Satellite SONARPLEX.
- Choose Status Delivery Configuration for Distributed Monitoring and configure the settings as like shown below.
| Parameter Name | Setting |
|---|---|
| Deliver Status at regular base | enable |
| Delivery Interval in Minutes (Heartbeat) | 30 |
| Retry Frequency in Minutes | 5 |
| Retry Attempts | 3 |
| Deliver following Events immediately | Service Alerts Host Alerts Suppress SOFT State alerts |
| Deliver Performance Data | enable |
| Do not store performance data locally | disable |
| Destination Host (NOC) | 172.16.0.254 |
| Destination Agent Port | 4192 |
| Destination Agent Password | HowTo-DM |
| Default service output upon transfer problems | Missing check result from satellite. |
| Default service state upon transfer problems | UNKNOWN |
| Retain state on outdated services | enable |
| Debug Level | WARN |
...